Inspiration for a creative home
10 DIY Rustic-Industrial Light Fixtures
8 Useful Apps for Parents of Babies
As a new mom, I am all about making life easier. Here's a few handy apps that I have found to be super helpful for the past few months! Let me know if you have any more great apps for babies!
How to makeover a brass lamp- Monthly DIY Challenge
This month's challenge was an interesting one! Modern Masters sponsored the challenge, and we each used one of their Metal Effects kits to create something with a patina finish. The kits include a primer, a metallic paint, and a spray that oxidizes the metal. They have three kits: rust on iron paint, green patina on copper paint, or blue patina on bronze paint. These kits definitely required that we think outside of the box and be creative, and I love what we each came up with!
This post contains affiliate links for your convenience. This post was also sponsored by Modern Masters. All ideas and opinions are my own. If you would like more information on sponsoring one of our Monthly DIY Challenges, please reach out to me using my contact form. You can also view my full disclosure policy here.
I thought the aqua green color of oxidized copper would go well in our new family room/play area. When we moved into our house, the previous homeowners left a couple of old brass lamps in the basement that just screamed that they were from the 1980-1990's era. I intended to donate them, but I'm glad they were still sitting there because they ended up being perfect for this project! We needed lighting for our living room, and I was intrigued by the idea of giving one of these lamps new life!
Materials:
-80's brass lamp
-Green patina Metal Effects kit
-pretty lamp shade
How to get a patina finish on a brass lamp:
The kits include everything you will need for this project, including brushes and stir sticks, and are available at HomeDepot.com.
Alrighty, here's my ugly brass 80's lamp in all its glory...
First, I gave the lamp a coat of primer with the included brush. I let it dry for 30 minutes, and then applied a second coat. Then, as the instructions stated, I waited 12 hours before the next step.
Once the primer was dry, I used the second included brush to apply the copper paint. I felt that the paint had good coverage and did not need a second coat, but if you need a second coat, let the first coat dry before applying the second coat.
Before the metallic paint dried, I lightly misted the entire lamp with the aging spray. Be careful not to over do it! I actually had some issues with the spray running down the lamp pole and pooling on the base, so I carefully set the corner of a paper towel into the puddle of spray and let the paper towel absorb as much as possible.
>You should start to see the oxidation take place almost immediately, however it will take a while until the whole effect is complete. I let the lamp dry over night before handling. Here's my lamp just a couple of minutes after spraying the aging solution...
And here it is after drying... so cool!
And here it is in our new living room/play area!
Overall, I think it turned out pretty well. There is definitely a little bit of a learning curve with this product, but I think if I used it again I would have an even better outcome! I am actually excited to try the rust kit as well. I think it would fit my more industrial decorating taste that is seen in almost every room in the house other than this one!
Be sure to check out the other creative patina ideas at my friends' blogs below! We've got a great mix of blues, greens, and rust! You can also check out the Modern Masters blog for detailed instructions and more creative ideas!
You might also like:
DIY Chicken Wire Light Fixture
Another piece of the laundry room is done, y'all! I am so excited about this project! I've been daydreaming about this DIY light fixture since 2013! This is inspired by this one at The Woodgrain Cottage. I started brainstorming our laundry room build years ago and stumbled upon Shayna's light when skimming through Pinterest for rustic/industrial laundry rooms. From the moment I saw it, I decided I would be making my own version for our new laundry space!
Subscribe to:
Posts (Atom)