The Inspired Hive

Inspiration for a creative home

Search

How to tile your shower like a DIY pro

Beginner's guide to DIY shower tile installation. Tutorial and tips for subway tile shower wall.

Our ugly master bathroom has been long overdue for a makeover, so we tackled it in the One Room Challenge! Renovating the shower was easier than we thought, thanks to some great materials and tools. Yesterday, I shared the best option for waterproofing your shower, and today I am sharing how to install the new tile! Never tiled before? Don't be scared! If we can do this, you definitely can!!! Once you find your groove, it goes fairly quickly!

How to easily tile a shower yourself! DIY bathroom renovation.



This post is sponsored by M-D Building Products.
This post also contains affiliate links for your convenience. 
For more information, see my disclosure policy.

M-D Building Products | PROVA Products




You might also love:

>Materials:



How to install shower tile:


1. Install tile backer board. See my tutorial on installing PROVA BOARD PLUS+.

How to easily tile a shower yourself! DIY bathroom renovation.

2. Gather your supplies. M-D Building Products carries this great little tile bucket kit that carries everything you need for this project! You know I am all about making things quick and easy, and this kit does just that!

How to easily tile a shower yourself! DIY bathroom renovation.


2. Lay out the first two rows of tile on the floor how you envision it on the wall. Play around with different patterns. Do you want the tiles off set or all aligned? 
Laying the tiles out also allows you to envision where your cuts will fall and how large they will be (you don't want to end up with a teeny tiny impossible cut on one side!). 

3. Use a large level to draw a line for the top edge of your first row of tile. Starting with the bottom row of tile, apply thinset mortar to the wall using a notched trowel. Use the trowel to make diagonal stripes in the thinset. Drag it across the thinset in sections across the wall.

The bottom row of tile is the most important. If your first row is perfectly level, the rest should be level as well and you can just spot check as you go. 

It's important to let the first row cure before moving on because this will prevent the rest of the rows from shifting since they will be sitting above a solid base. Follow the instructions on your thinset for cure time. 



4. Measure the center of the wall and draw a line from floor to ceiling. Starting at the center, place a tile onto the thinset. Use shims if needed (our shower pan wasn't perfectly level, so we adjusted using wooden shims).

How to easily tile a shower yourself! DIY bathroom renovation.

5. Place spacers in between tiles. Check for levelness of each tile using a small level. Check levelness of the whole row with the large level after you've done several tiles. 

div class="separator" style="clear: both; text-align: left;">This may seem like overkill, but trust me, you don't want to run into issues with levelness once you get to the top of the shower and don't have enough space left for adjustments! Save the corner pieces for last.
How to easily tile a shower yourself! DIY bathroom renovation.

6. When you get to the corner piece, measure your space. If your walls aren't perfectly plumb (like ours), it's best to measure the cuts for each and every row rather than assuming they will all be exactly the same. 

Use a tile cutter to make the cuts. The 20 inch Tile Cutter PRO, is amazing, and I can't recommend it enough! It made the job quick and easy. All you have to do is measure, score, and press. Perfectly cut tiles, every time! 

We thought for sure we would need to use a wet saw, but the Tile Cutter PRO got the job done fast with no mess. (Note- if you find that it's becoming difficult to make perfect cuts or your tiles start chipping on the cut line, it's probably time to change your cutting wheel! Buy a few extras to have on hand.)

How to easily tile a shower yourself! DIY bathroom renovation.

7. Now that you've finished the first row, sit back and relax for a few days and let it set. (Again, follow the cure time on your thinset).

8. Once the first row has set, move on to the next row. You have a couple of options for how to tackle the rest. If you are like us and have a little one running around, you're probably working a little at a time during naptime or at night. Because of this, we worked in sections of about 4-5 rows at a time allowing at least 24 hours of cure time in between sections. If you have the time, you could also just work continuously on one whole wall before moving on to the next wall. 

How to easily tile a shower yourself! DIY bathroom renovation.

9. Again, apply thinset to the wall using a trowel. Only apply as much as you need for the size of the section  you are doing. It starts to dry fairly quickly, so you don't want to apply it to the whole wall at one time.

How to easily tile a shower yourself! DIY bathroom renovation.

10. Apply a section of tile using spacers in between to keep things accurately aligned and check for levelness as you go. The spacers should keep things pretty level, but again, if your walls or shower pan aren't quite level, you may run into issues.

How to easily tile a shower yourself! DIY bathroom renovation.

We used 3/16" spacers. This is totally preference. Typically smaller tiles = smaller spacers and larger tiles = larger spacers, but I love the look of thick grout lines with subway tile, so we went with the 3/16" spacers. 

How to easily tile a shower yourself! DIY bathroom renovation.

11. When you arrive at the level of the shower faucet, we scored the tile front and back and then used tile nippers to make cuts. Working slowly is key with the nippers so that you don't crack your tile!

12. Once you've tiled the whole shower, allow everything to cure for at least 24 hours before moving on to grouting! You're almost done! (Don't forget to remove all of the spacers once cured!)

How to grout your new tile shower:


1. Choose your grout. We chose to use premixed grout to save time and make our lives easier! Polyblends grout carries many colors. We chose a taupe color that would blend well with our existing floor tiles. 

We learned that because we were using 3/16" spacers, we should use sanded grout. Anything over a 1/8" grout-line requires sanded grout, and anything smaller can use unsanded. 

2. Pack the grout into the tile joints using a grout float. Apply it in a "V" shaped motion, diagonally to the left, then diagonally to the right. Scrape off extra grout with the float as you go.

How to easily tile a shower yourself! DIY bathroom renovation.

3. Use a damp grout sponge to wipe off the excess grout from the face of the tiles. We quickly learned that you should wring out as much water as possible from the sponge before wiping. It should be just barely damp. 

Fill your bucket with water and rinse the grout from the sponge in it frequently. You may also need to change the water in your bucket frequently, as it gets cloudy quickly. We found that changing the water helped reduce the amount of haze on the tile.

How to easily tile a shower yourself! DIY bathroom renovation.

4. Follow the directions on your particular grout for removing the haze from the tiles. Ours recommended waiting a minimum of four hours and no more than 24 hours. It will slowly harden and become more difficult to remove, so I recommend aiming for four hours. 

If you go past 24 hours, you will likely need a specialized cleaner to assist in removal. Use a soft, damp towel to wipe the haze away.

5. Once the haze is removed, let the grout completely cure for 24 hours before applying caulk. You can purchase caulk in a matching color, and Polyblends carries a sanded caulk too. We caulked along the corners of the shower, the ceiling, and the shower pan. Use your finger or a caulk tool to smooth the caulk. Sanded caulk takes a long time to dry, so be careful not to bump it at all! (Ask me how I know! 😂)

6. Install your shower faucet and shower head, and admire your new pretty shower!!!

How to easily tile a shower yourself! DIY bathroom renovation.


Pin it for later:


How to tile shower. Hand holding sponge applying grout to cream subway tile in shower.


Related Posts:


No comments

Post a Comment